![]() No extra fuel plumbing is required if using stock fuel lines. Low profile adapter fittings come pre-installed that permit direct connections for all factory fuel line variations (SAE quick connect and hose barb) and fit under fuel pump access cover. The factory Nissan fuel level sender, low fuel switch, and fuel temperature (OBD-II only) are reused so full functionality is retained.Ī venturi jet pump is integrated into the top plate and provides means to draw fuel from the opposite side of the fuel tank. From there, they feed through PTFE hoses to the top plate. ![]() The pump(s) are suspended down in the bottom of the tank, similar to the stock fuel hanger. Fuel pump options include Walbro (Ti Automotive) or AEM. It can be configured with 1 or 2 aftermarket fuel pumps to meet the fuel demands of various high performance engines. The Radium Engineering fuel pump hanger replaces the entire factory fuel pump assembly inside the Nissan fuel tank. ![]() Nissan R34 Skyline (All models/trims/RHD/LHD) Nissan R33 Skyline (All models/trims/RHD/LHD) Nissan S15 200SX (All models/trims/RHD/LHD) Nissan S15 Silvia (All models/trims/RHD/LHD) Nissan S14 240SX (All models/trims/RHD/LHD) Nissan S14 200SX (All models/trims/RHD/LHD) Nissan S14 Silvia (All models/trims/RHD/LHD) ![]() The OEM fuel level and fuel temperature sensors secure to the mounting bracket.This product is compatible with the following vehicles: Furthermore, all returning fuel from the pressure regulator return and the crossover hose enter the collector box keeping it full. It serves as a trap door keeping the pump(s) supplied with fuel during aggressive driving. There is a 1-way fill valve incorporated on the front side of the tank that flows 355LPH. It improves the fuel supply around the pump(s) inlet. Shown below is the smallest OEM gas tank baffle found in the model list above. Unlike the 2004-2007 WRX STi OEM variation, the Radium Engineering collector box has been optimized to work in ALL gas tanks. The kit also includes a streamlined anodized aluminum collector box, shown below The kit includes a venturi jet pump with a new integrated pressure relief valve that is optimized for high flow pump(s) The low profile design keeps all wiring tucked nicely underneath the OEM cover plate. Nonconductive acorn nuts are provided to prevent any accidental short circuits.įurthermore, the high quality in-tank wiring is insulated with chemically resistant ETFE. Stainless steel crimp-on ring terminals and heat shrink are provided for external wiring connections. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. There is also a return line SAE quick disconnect fitting included for newer models. Lastly, -6AN male fittings are included for those that use aftermarket feed and return hoses. Shown below is for mid model years which use a SAE quick disconnect fuel feed. To simplify plumbing, the kit includes OEM hose adapter fittings for all model years listed. The crossover and return uses 6AN ORB threaded ports. The pumps merge into a single port outlet with 8AN ORB threads. The fuel level sender and temperature sensors are retained, as shown below. The machined assembly mounts in the factory fuel tank using the OEM gasket and hardware. Radium fuel pump hanger allows the use of 1 or 2 aftermarket high-flow fuel pumps.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |